Blog

Blog

Do it yourself rust protection for your Ford Ranger this winter

 

Scroll to the bottom for your chance to win a FREE Lanoguard kit

“If you love your vehicle, Lanoguard it!”

“If you love your vehicle, Lanoguard it!”

Protecting the underbody of your vehicle is often neglected, expected to be messy, with hours of masking up, and a smelly, difficult, time-consuming job. With the UK’s winter just around the corner and the gritters expected to be out in full force, Lanoguard offers you simple, easy, DIY rust protection for your Ford Ranger's underbody.

Lanoguard is made from premium quality British products which are jet wash, heat, saltwater and petrol resistant. It protects against electrolysis, corrosion and seizing. It stays in place and won’t evaporate or dry out. The lanolin creates a hermetic seal on the surface creating a barrier coat between the material and the environment, stopping oxygen and water from getting in. You can be rest assured that your Ranger will remain protected long-term. Their formula is also non-petroleum based making it eco-friendly, non-toxic and safe to apply without the need for heavy PPE.

Lanoguard can be used all year round even in the cold damp winter months. It acts as a barrier as it hermetically seals (air-tight) to the surface, so moisture is driven out and it stops moisture and oxygen getting in, therefore stops rust developing.

Lanoguard can be applied in 3 easy steps with minimal preparation:

1. Clean the surface to be treated and remove any unsound surfaces (rust, flaking, laminating etc). A good jet-wash will usually do the trick, but wire brushing and wiping should be fine too!

2. Apply Lanoguard Grease (warmed if possible) to any areas very vulnerable to high corrosion or seizing up. Apply warmed (if possible) Lanoguard Spray to all areas you'd like to protect. Check for any missed parts and wipe excess spray from places you'd like a thinner coat.

3. Lanoguard typically lasts up to a year, so be sure to apply yearly to your vehicles/machinery to keep them in optimal condition. You can apply more often if you wish for an even stronger protection!

 
lanoguard-vehicle-underbody-and-chassis-care-kit-525824_1024x1024@2x.jpg
lanoguard-vehicle-underbody-and-chassis-care-kit-212365_1024x1024@2x.jpg
 

From Lanoguard:

“Here at Lanoguard we are aware that rusty chassis are a problem across the Ford Ranger community. With our kits, this all changes and is made easy for you. Lanoguard underbody protection is long-lasting, can be applied in around 20 minutes and will defend the vehicle you love from corrosion, so you can enjoy driving without the worry”

"Highly recommended. Very easy and clean to use product which is ideal for DIY rust treatment and prevention. Great support and fast turnaround of orders." - Lanoguard Customer Quote

"Having used the more traditional wax/oil based treatments many times (and always dreading the annual getting covered in the stuff and coughing & spluttering on the fumes) I found Lanoguard a whole lot more pleasant to work with, best bit was not getting covered in sticky nasty petrochemicals" - Lanoguard Customer Quote

 
 
 

Competition

Have the chance to win an Ultimate Kit by clicking the below button and entering your email address. Competition is running 17th October - 5th of November 2021.